Storage; Ports & Devices; Led Settings; Maintenance - Axis Q1910 User Manual

Bonjour
The network camera includes support for Bonjour. When enabled, the camera is automatically detected by operating systems
and clients that support this protocol.

Storage

SD Card
The Disk Management window is used to set up and manage local storage. It is used to connect memory cards for recording
video, monitoring a disk's status, enabling automatic cleanup and preventing the memory card from being overwritten.
Storage Device
Storage device is used to identify and monitor the status of the SD card. it shows the size of the memory card and how much
free space is available for storage. It is also used to mount and format SD cards for local storage.
Device Settings
Device settings is used to configure removal of recorded video. Automatic disk cleanup can be enabled and set up according to
a schedule, and an SD card can be locked to prevent storage removal.
Ports & Devices
I/O Ports
The network camera has two configurable input/output ports for connection of external devices. Select the port direction
(Input or Output) from the drop-down list. The ports can be given descriptive names and their Normal state and be
configured as Open circuit or Grounded circuit.
See Unit connectors, on page 8, for information on how to connect external devices.
COM Port
This page contains settings for the RS-485/RS-422 serial interface. To enable support for a pan/tilt motor connected to the
camera's RS-485/422 port, select Pan Tilt Zoom and click Save.
See also PTZ (Pan Tilt Zoom), on page 28.
See Unit connectors, on page 8, for wiring information.

LED Settings

The Status indicator LED on the camera can be set to flash at a configurable interval (or to not light up at all) when the unit is
accessed. For a listing of all LED behavior, see page 10, or the online help.
The LED does not flash when the stream is retrieved using H.264 multicast.

Maintenance

Restart - The camera is restarted without changing any settings.
Restore - The camera is restarted and most settings are reset to factory default values. The settings that do not reset are:
• the boot protocol (DHCP or static)
• the static IP address
• the default router
• the subnet mask
• the system time
• the IEEE 802.1x settings
AXIS Q19 Series - System Options
46