Table of Contents
Advertisement
Select <PRESET SPEED> and adjust the pan/tilt speed of the preset.
5.
6.
Set the <DWELL TImE> that defines the camera's hold duration and <ImAGE
HOLD> of the preset.
If you set the <IMAGE HOLD> to <ON>, the video image will be held still until the
camera reaches the preset position.
Set <CAmERA SET> to <ON>.
7.
You can adjust camera setups for each
preset.
For details on setting <IRIS>, <WHITE BAL>
and <FOCUS MODE>, refer to "CAMERA
SET". (pages 26 ~ 35)
M
The preset position can be specified for a
tilt range of between -6° and 90°.
Those presets that are out of a tilt of 90° can not be specified.
If you try to specify a preset position for a range exceeding a tilt of 90° using a
controller (SSC-1000, 2000 or 5000), you will see a message of <SET AGAIN> on
the screen. If this is the case, try again for a range below a tilt of 90°.
If you upload/download the menu setting using SSC-1000, 2000 or 5000, the
preset may differ from the menu setting so define the preset again after the
operation.
CAMERA SET
IRIS
WHITE BAL
FOCUS MODE
English _
ALC
MF
Hide quick links:
Advertisement
Table of Contents
