Cycle Settings - Kenmore 417.4413 Use & Care Manual

Cycle Settings

Appropriate wash temperature, spin speeds, and soil level will
automatically be displayed for each cycle. The settings can be
changed before the cycle is started.
To adjust cycle settings, press any of the settings buttons to
navigate to the cycle settings screen. Scroll through the tem-
perature, soil level, or spin speed selections by pressing the up
or down arrows corresponding to each setting.
To protect your fabrics, not all settings are available with every
cycle. Only the settings available for a particular cycle will be
displayed. After you have made the desired adjustments, press
the Back button to return to the home screen or
begin the cycle.
NOTE
To change the settings after the cycle starts, press
and then press the any of the settings buttons. Adjust the
settings and press START to resume the cycle.
WASH/RINSE WATER TEMPERATURE
Select a wash water temperature according to fi ber con-
tent, colorfastness and soil level. A cold water rinse saves
energy and reduces wrinkling.
Wash water temperatures are automatically regulated to
maximize detergent eff ectiveness and improve washing
performance. The water heater setting and its distance
from the washer, water usage in other parts of the home,
and seasonally low ground water temperature in some
geographic areas can aff ect water temperature.
Extra Hot/Cold
Use this setting for heavily soiled colorfast fabrics such as
towels, bedding, and children's clothing. Extra Hot/Cold
provides wash water heated with an internal boost heater.
Hot/Cold
Use this setting for heavily soiled white or colorfast cottons
and blends.
Warm/Warm
Use this setting when a warm water rinse is desired.
Warm/Cold
Use this setting for normally soiled white or colorfast cot-
tons or blends.
Cold/Cold
Wash and rinse temperatures are equivalent to tempera-
ture of cold tap supply. Use this selection for lightly soiled
non-colorfast items, knits, delicates, and hand washables
and other fabrics and colors that are prone to dye transfer.
For use with cold water
START to
detergents.
PAUSE
SPIN SPEED
Extra High, High, Medium and Low spin speeds are
available for appropriate cycles. The spin speed and/or
duration of fi nal spin vary from model to model and cycle
to cycle.
Increasing the spin speed will extract more water, decrease
drying time and conserve energy. Decreasing the spin
speed will reduce wrinkling.
Select Low spin speed to gently spin items that should be
line dried.
Use No Spin to omit the fi nal spin at the end of the cycle.
The load will be very wet. Remove items from the wash
drum to drip dry or select a Rinse & Spin cycle to remove
excess water at a more convenient time.
SOIL LEVEL
Adjust the wash time in 3-minute increments based on the
soil level of each load. Five soil levels are available.
9
Operating Instructions