Esc T N - Citizen CBM-202PC-04 User Manual

ESC t n

[Function]
[Code]
[Range]
[Outline]
[Default]
[See Also]
[Sample Program]
[Print Results]
Selecting the Character Code Table
<1B>H<74>H<n>
{0 n 1} Data is described in Hex code.
Selecting Page n on the character code table:
The character code table is selected depending on the value of n.
"n" means the followings.
n (Hex)
0
1
The initial value of n is subject to the character set for the country
specified by the function selecting terminal (Gate Array Pin 39,42,43).
• When Japan is selected: Domestic characters
• When non-Japan is selected: IBM characters #2
Character Code Table
LPRINT CHR$ (&H1B) + "t" + CHR$ (0) ;
LPRINT " n=0" ;
FOR C=&HB1 TO &HB5
LPRINT CHR$ (C) ;
NEXT C
LPRINT CHR$ (&HA) ;
LPRINT CHR$ (&H1B) + "t" + CHR$ (1) ;
LPRINT " n=1" ;
FOR C=&HB1 TO &HB5
LPRINT CHR$ (C) ;
NEXT C
LPRINT CHR$ (&HA) ;
Condition
Page 0(IBM Character #2)
Page 1(Domestic Character)
67
CBM-202PC-04 User's Manual
CITIZEN