Denso QK11-U User Manual page 28

Data Transfer
Transmission format
Header Code ID mark
(1) Header
You may select either "No header" or STX.
(2) Terminator
You may select ETX, CR, LF, or CR LF.
(3) BCC
The data following the header, and up to the terminator, are exclusive OR; these data
are transferred byte by byte in binary codes.
You select whether BCC is to be transferred or not. Note that BCC cannot be transferred
without a header.
(4) Code ID marks
Code ID marks are characters that identify the types of two-dimensional codes and bar
codes. You may select whether those ID marks will be transferred, by using the
QR-coded parameter menu.
QR code
UPC-A or EAN-13
UPC-E
EAN-8
CODE39
Interleaved 2 of 5
CODABAR
CODE128
EAN-128
No. of digits
Code type
16
Data read Terminator BCC
Code ID mark
Q
A
C
B
M
I
N
K
W