Denso QK11-U User Manual page 19

(6) Make sure
USB-COM Port" is displayed on the
screen showing message "Windows is
now ready to install the best driver for
this device", and then click "Next".
(7) If the next screen is displayed, click
"Finish".
After copying driver files is finished,
"New hardware found" messages about
"Unknown device" and "DENSO WAVE
USB-COM Port" are displayed. Then all
of install process is over.
(8) The check of connection is performed
on the screen of "Device Manager".
If "DENSO WAVE USB-COM Port" is
added to the item of "Port (COM &
LPT)", it connects normally.
When the item is not added or become
" " and " ", please remove this driver
with the uninstaller. After uninstalling
and rebooting your PC, redo connection
and driver installation again.
7
that "DENSO WAVE