Connecting A High-Definition (Hd) Source (Yuv); Using Headphones - Alba ALTVDI711701 Instruction Manual

CONNECTIONS

CONNeCTING A HIGH-DeFINITION (HD) SOURCe (yUV)

High-Definition (HD) Devices with component video output must be connected to the YUV input.
Connect the component video cable and audio cable (not included) as shown.
Make sure you connect the YUV Scart adaptor to this unit, then connect component video cable
and audio cable from the other equipment (COMPONeNT VIDeO OUT and AUDIO OUT) to this
unit (SCART and AUDIO IN).
To operate the connected device and play the source, first press the FUNCTION button to select
the YUV/SCART mode.
YUV SCART
adaptor
(included)
To SCART
jacks
Note:
When connecting a DVD player to the television, the picture resolution is dependent upon the
resolution of both the DVD player and the TV. For best results, select the highest resolution of the
DVD up to the TV maximum of 1080i.

USING HeADPHONeS

• Turn down the volume before connecting headphones
to the unit, then adjust the volume to your desired
level.
• When headphones are connected, no sound will
come from the front speakers.
Note:
• Avoid listening to sound at high levels for prolonged
periods of time. This may be harmful to you and may
cause hearing loss.
* May require a subscription
for receiving HD channels.
Check with your cable/satellite
service provider for details.
To AUDIO OUT
jacks
To AUDIO
IN jacks
To COMPONENT
VIDEO OUT jacks
- 19 -
earphones / Headphones
(1/8" [3.5mm] diameter plug)