Connections; Connecting A Tv Antenna/Cable/Satellite; Connecting The Power Cord - Alba ALTVDI711701 Instruction Manual

CONNECTIONS

CONNeCTING A TV ANTeNNA/CABLe/SATeLLITe

To view television channels correctly, a signal must be
received from one of the following sources:
- An indoor or outdoor aerial antenna
- RF output of a cable system
- RF output of a satellite system
Note:
For receiving over-the-air TV broadcasts, we recommend
that you use an external fixed antenna. Should you require
the use of a temporary antenna, please ensure that you
purchase an antenna with sufficient ability to receive in
weak signal areas. Only when you are in close proximity
to a transmitter will a temporary antenna reproduce a signal
as strongly as a fixed antenna.

CONNeCTING THe POWeR CORD

• Connect the AC power cord into a wall outlet.
• Press the / I button on the unit or remote control to turn on the unit.
Notes:
• Be sure the AC power cord is disconnected and the
TV is switched off before making connections.
• Make sure that all the components are connected
correctly.
• When you are not going to use the unit for a long
period of time, disconnect the power cord.
• The apparatus should not be exposed to dripping or
splashing and that no objects filled with liquids, such
as vases, should be placed on apparatus.
• The mains plug is used as the disconnecting device.
It should remain readily accessible and should not be
obstructed during use.To be completely disconnected
from the supply mains, the mains plug of the apparatus
should be disconnected from the mains socket outlet
completely.
- 10 -
Satellite / Cable RF Out or
TV antenna cable to
TV ANTeNNA CABLe Terminal
(cable not included)
To AC Outlet