Step By Step Installation Of Your Factory-Built Chimney - Drolet CLASSIC EPA Owner's Manual

Classic epa wood stove

Hide thumbs Also See for CLASSIC EPA:

Table of Contents

2.2.1 Step by step installation of your factory-built chimney

The way to install your chimney may vary from one chimney manufacturer to another. The instructions

contained in this manual are based on the recommendations of chimney manufacturers whose

products are sold at many North American retailers of wood stoves and related heating accessories.

Wall support system

If your chimney must rise along an outside wall, you need to connect it to your stove through an

adjacent wall. For this type of installation, the following items are normally required :

Chimney

• Suitable lengths of chimney (enough to go up to your roof)

• An adjustable wall support

• A wall thimble

• An adequate number of wall bands (one for every 8 feet of chimney, excluding the roof portion)

• A stove pipe adapter

• One insulated tee & plug

• A roof flashing kit (if necessary)

• A chimney cap.

• Roof guys (if required)

Stove pipe

• An adequate number of stove pipe sections.

• A 90

elbow

Typical installation through the wall

FIGURE 2.2 Minimum Height of the Chimney

Table of Contents