Toshiba Strata DK 280 User Manual page 16

Automatic Number
Identification (ANI) and
Caller ID calls:
ANI Example
lF!iFzLl
CN:7145876782
ANSWERED LINE 3 I
HOLD LINE 3
1
ISEP 9 TUE 18:301
If your telephone has been programmed with ANI capability, you may:
n Activate ANI and/or Caller ID display mode by pressing Mode + 6 1.
(System default is ON.)
n Deactivate ANI and/or Caller ID display mode by pressing Mode + 6 0.
Note:
ANI information cannot co-exist on the same telephone LCD with Dialed
Number Identification Service (DNIS) information. (See DNIS.) If your
system is programmed to receive both ANI and DNIS information on
incoming calls, then when an ANFDNIS call is ringing, press Page to
alternate between DNIS and ANI LCD displays.
If your telephone has been programmed with ANI capability and you have
activated the ANI display feature, the calling party's telephone number (up to 10
digits) will be displayed when the call arrives at your station.
Notes:
1. The following examples show ANI. If Caller ID was activated, then
the caller's name or number would appear on the first line.
2. If CN: is displayed, the calling number is an (ANI) number; CN: does
not precede Caller ID numbers.
When you answer the incoming call. After you answer a call, call duration will
display on LCD.
When you place the call on hold.
Held call automatically recalls your station after a programmed period of time.
The display changes to indicate calling status.
Station 201 is transferring an ANI (or Caller ID) call to you (station 200). For the
purpose of demonstration, following screens depict different displays of your
station.
6