Timed Reminders With Memo - Toshiba Strata DK 280 User Manual

. . . . .
-.-
' _
:: :.
To Check a Speed Dial
Number:
1. Press Mode + 8 when
telephone is idle.
2. Dial a two-digit speed
dial number.
3. Press Page to scan
the directory for the
appropriate
number/memo.
Note:
The station must be enabled via system programming for LCD message
memory
Personal speed dial number (10 * 49) or system number (600 N 699).
If the number is longer than 16 digits, a '(+'I will appear in the far right corner of
the display. Press Scroll to display the remaining digits.
Timed Reminders with Memo
This feature allows five separate messages to be set at each LCD station. These
messages will be displayed at the times (hour and minute) set by the station
user. They can either be displayed just once or repeated on a daily basis.
To Set a Timed Reminder
with Memo:
1.
2.
3.
4.
5.
6.
Press a
[DN].
Dial a three-digit
reminder number
(# 6 0 5 - # 6 0 9).
Enter the desired time
for the message to be
displayed.
Dial 0 if the message is
to be repeated every
day, or 1 if it is a one-
time message only.
Enter the desired
message number, or 00
if no message should
be stored.
Press Redial to record
the data in memory.
The message time must be in 24-hour clock format (i.e., HHMM).
Personal message (10 m 19) and system (60 m 99). The message does not
display when setting a timed reminder-it displays when the reminder activates.
Messages are set using the Record a Message method.
The LCD displays "DATA PROGRAMMED". You will hear a confirmation tone.
The message will be displayed at the specified time, and a beeping tone will be
heard for 30 seconds (or until it is canceled by pressing Mode + 0).
48