Using The Transmitter / Pairing Instructions - Turtle Beach Ear Force X-Ray User Manual

Using the Transmitter / Pairing Instructions

The transmitter allows wireless flexibility without the restrictions of cables when using your Turtle Beach X-Ray
headset. This wireless communication is through Dual Band WiFi transmitting a signal between the transmitter and your
headset from up to 30 ft. If you are beyond this range or there are obstructions to the signal, you may hear a popping or
clicking sound as the signal weakens and is eventually lost.
For optimal performance, place the transmitter in an open area free from interference from other objects that may
otherwise obstruct the WiFi signal. Avoid placement on a metallic surface such as a home theater A/V receiver as this
may cause interference or a weak signal.
Pairing Instructions
In order for your Turtle Beach X-Ray headset to use the WiFi signal, they need to be "paired" with the transmitter. Follow
the pairing instructions below, keeping the headset and transmitter at least two feet apart while doing so. The headset
and transmitter are pre-paired out of the box. The instructions below are only necessary if pre-pairing appears to have
been lost.*
1. Headset and transmitter should be powered OFF and at least 2 feet away from each other.
2. Connect the transmitter to power (see previous page for instructions)
3. Press and hold the Pairing button on the transmitter for 5 seconds until the LED flashes rapidly. Release.
4. Press and hold Power button (approximately 6 seconds) on the headset until the LED flashes rapidly. Release.
5. Once your Turtle Beach X-Ray headset has been successfully paired, the Headset LED will blink once per second and
the transmitter Power LED will light solid.
4
3
PAIR
SURROUND SURROUND
ANGLES ON/ OFF
* The pairing process can take up to 30 seconds to complete. If pairing is unsuccessful on
first attempt, please try again. It may take as many as five attempts to pair successfully.
9