Turtle Beach Ear Force X-Ray User Manual page 7

Feature / Function Map (Location of controls / inputs)
1
2
PAIR
7
D
3
4
5 6
SURROUND SURROUND
ANGLES ON/ OFF
8 9
X-Ray Transmitter
1. Digital Input LED: This LED turns on when a digital input
signal is detected. When this LED is ON, the analog input
is turned off.
2.
Surround Sound LED: The LED will light whenever the
digital input is being processed by the surround sound
decoder. When this LED is off, the audio signal will be
heard in stereo.
3.
Dolby® Digital LED: The LED will light whenever a Dolby
Digital encoded signal is detected on the digital input.
4. Power/Link LED: When the transmitter is powered on
and communicating with the headset, this LED will be on
solid. When the headset is turned off, the LED will turn off.
A slowly pulsing LED indicates that the transmitter can't
communicate with the headset. This could happen when
the headset is out of range, turned off or not paired with
the transmitter.
5. Digital Input and Output: Connect the digital input to the
Xbox 360 digital output using the included digital optical
cable. The digital input is passed through to the digital
output so you can connect the X-RAY transmitter and
your home theater system to hear the Xbox sound on the
headset and speakers at the same time. When a digital
signal is detected by the optical input, the Digital Input LED
will be lit.
6. Analog Input Jack: Provides a 3.5mm input for digital
music players or additional audio sources. (3.5mm cable
sold separately)
NOTE: The analog input is deactivated whenever a digital
input is active, so both the digital and analog inputs cannot
be used at the same time.
Pair Button: Press and hold to activate pairing mode.
7.
Surround Sound Angles Button: Press to select different
8.
HRTF surround angles. (see pg. 16)
9.
Surround Sound On/Off Button: Pressing this button toggles
between surround sound and stereo sound. When surround
sound is active, the Surround Sound LED will be lit.
7