Note: When Your Leading Hand Comes Within; 4" Of The Cutterhead, Lift That Push Block Up; And Place It On The Workpiece Portion That Is; On The Outfeed Table. Now, Focus The Down - Grizzly G0706 Owner's Manual

Edge Jointing
Figure 27.
Figure 28.
Figures 27–28
To edge joint on the jointer:
1.
2.
Instructions
Stock Inspection & Requirement
Page 21
3.
Setting Outfeed Table Height
Page 33
4.
Note: We suggest
edge jointing, and a more shallow depth for
hardwood species or for wide stock.
5.
6.
7.

Note: When your leading hand comes within

4" of the cutterhead, lift that push block up

and place it on the workpiece portion that is

on the outfeed table. Now, focus the down-

ward pressure with the leading hand while

feeding, then repeat the same action with

your trailing hand when it comes within 4" of

the cutterhead. Keep your hands safe! DO

NOT allow them to get any closer than 4"

from the cutterhead.

8. Step 7
Safety
Page 6
1 1
⁄ "– ⁄ " depth of cut for
16 8
ON