Handling Guidelines - Pioneer DEH-X6590BT Owner's Manual

Appendix
Additional information
Message Cause Action
PROTECT All the files in Transfer audio
the USB storage files not em-
device are em- bedded with
bedded with Windows Media
Windows Media DRM 9/10 to the
DRM 9/10. USB storage de-
vice and connect.
! Connect a USB
N/A USB The USB device
connected to is Mass Storage
not supported Class compliant
by this unit. device.
! Disconnect
your device and
replace it with a
compatible USB
storage device.
CHECK USB
The USB con- Check that the
nector or USB USB connector or
cable has short- USB cable is not
circuited. caught in some-
thing or dam-
aged.
CHECK USB The connected Disconnect the
USB storage de- USB storage de-
vice consumes vice and do not
more than maxi- use it. Turn the
mum allowable ignition switch to
current. OFF, then to ACC
or ON and then
connect only
compliant USB
storage devices.
20
En
Message Cause Action
CHECK USB The iPod oper- Make sure the
ates correctly connection cable
but does not for the iPod has
charge. not shorted out
(e.g., not caught
in metal objects).
After checking,
turn the ignition
switch OFF and
back ON, or dis-
connect the iPod
and reconnect.
ERROR-19 Communication Perform one of
failed. the following op-
erations.
–Turn the ignition
switch OFF and
back ON.
–Disconnect the
USB storage de-
vice.
–Change to a dif-
ferent source.
Then, return to
the USB source.
iPod failure. Disconnect the
cable from the
iPod. Once the
iPod's main
menu is dis-
played, reconnect
the iPod and reset
it.
ERROR-23 USB storage de- USB storage de-
vice was not for- vice should be for-
matted with matted with
FAT12, FAT16 or FAT12, FAT16 or
FAT32. FAT32.
Additional information
Message Cause Action
ERROR-16 The iPod firm- Update the iPod
ware version is version.
old.
iPod failure. Disconnect the
cable from the
iPod. Once the
iPod's main
menu is dis-
played, reconnect
the iPod and reset
it.
STOP There are no Select a list that
songs in the contains songs.
current list.
NOT FOUND
No related Transfer songs to
songs. the iPod.
Bluetooth device
Message Cause Action
ERROR-10 The power failed Turn the ignition
for the switch OFF and
Bluetooth mod- then to ACC or
ule of this unit. ON.
If the error mes-
sage is still dis-
played after
performing the
above action,
please contact
your dealer or an
authorized
Pioneer Service
Station.

Handling guidelines

Discs and player
Use only discs that feature either of the following
two logos.
Use 12-cm discs. Do not use 8-cm discs or an
adapter for 8-cm discs.
Use only conventional, fully circular discs. Do not
use shaped discs.
Do not insert anything other than a CD into the
CD loading slot.
Do not use cracked, chipped, warped, or other-
wise damaged discs as they may damage the play-
er.
Unfinalized CD-R/RW discs cannot be played
back.
Do not touch the recorded surface of the discs.
Store discs in their cases when not in use.
Do not attach labels, write on or apply chemicals
to the surface of the discs.
To clean a CD, wipe the disc with a soft cloth out-
ward from the center.
Condensation may temporarily impair the player's
performance. Let it rest for about one hour to ad-
just to a warmer temperature. Also, wipe any
damp discs off with a soft cloth.