Table of Contents
Advertisement
Auto / Enter
In OSD setup menu interface, the key is used to make selection.
In Dome Control mode, this key is used to activate automatic focus and
iris function.
Iris Close
Use to close the Iris on the dome camera.
Focus Far
Use to focus the selected dome camera far.
Zoom Out
Use to zoom out the dome camera. This function enables users to shrink the
current image and view a larger area.
Pan / Tilt
Use to pan and tilt dome camera.
4.5.5
Setting Preset Points
The DVR allows users to set preset positions. The amount of preset points
depends on the dome manufacturer.
Follow the steps to set preset points.
Press a Channel key to view the corresponding camera in full screen.
Then press DOME to enter Dome Control mode. A Hint Screen shown as
below figure displays on the screen.
Press 2 to hide the Dome Control Hint Screen; press 2 again to toggle the
Hint Screen.
Use Direction keys to position the dome camera to desired position.
DOME / ESC: Exit
MODE / PLAY: Iris Open / Close
FREEZE
SEQ /
MENU / SEARCH: Zoom In / Out
ENTER: Auto Focus / Iris
◄▲▼►: Pan / Tilt
CH1: Set / Go Preset
CH2: Hint Screen On / Off
Dome Control
Hint Screen
: Focus Near / Far
DVR User's Manual
41
Advertisement
Table of Contents
