Table of Contents
Advertisement
4.5.2
Dome Protocol Setup
The Dome Protocol item lists the available dome protocols for communicating
with dome cameras connected to the DVR. From the Main menu, select
<Camera Setup> and press ENTER. The following menu is displayed.
To configure dome protocol, select a camera first and set the communications
protocol associated with dome camera using the Direction keys and ENTER.
4.5.3
RS485 Setup
The DVR controls the domes via RS-485 communication protocol. The
RS-485 parameters in the DVR must be set to the same parameters set in
dome camera.
Users are allowed to change the RS-485 settings of the DVR. Select
<System Setup> in Main menu, then select <RS485 Setup> from the System
Setup menu and press ENTER. The following menu is displayed.
Analog Camera Select
Dome Protocol
Dome ID
Camera Title
Covert
Brightness
Contrast
Saturation
Hue
Audio Association
NOTE: The settings become effective after saving the changes and
exiting from the menu.
Unit ID
Baud Rate
Bits
Stop
Parity
Analog Camera
RS485 Setup
DVR User's Manual
CH1
None
0
No
0
0
0
0
Yes
224
9600
8
1
None
39
Advertisement
Table of Contents
