Network Time Protocol Setup - LiteOn H.264 User Manual

3.4.3

Network Time Protocol Setup

Time Zone
Select <Time Zone> to enter the time zone. To find out the correct local time
zone, please visit
figure.
Network Time Protocol Setup
After entering the time zone, the <Network Time Protocol Setup> option will
appear. Select the <Network Time Protocol Setup> to set the time server.
The default time server is time.nist.gov, but the user can change it to other
time servers when desired. A list of IP addresses of the time servers is listed
below.
After the time server is set, select <Manually Time Sync> to sync the time.
The time sync can also be updated periodically. Select <Automatically Time
Sync>, and the time will be automatically synced once an hour.
www.greenwichmeantime.com
NOTE: The <Time Zone> must be set to the correct local time zone
or the <Network Time Protocol Setup> will not be accessible.
129.6.15.28
132.163.4.102
192.43.244.18
206.246.118.250
207.200.81.113
or refer to the following
129.6.15.29
132.163.4.103
131.107.1.10
208.184.49.9
64.236.96.53
DVR User's Manual
132.163.4.101
128.138.140.44
69.25.96.13
64.125.78.85
68.216.79.113
19