Error Message - Olympus µ 1060 Instruction Manual

Error message

When one of the messages below is displayed
on the monitor, check the corrective action.
Error message
q
Card problem
Insert a new card.
CARD ERROR
q
Card problem
Use a computer to cancel the read-
WRITE
only setting.
PROTECT
Internal memory problem
>
• Insert a card.
MEMORY FULL
• Erase unwanted images.
Card problem
q
• Replace the card.
CARD FULL
• Erase unwanted images.
Card problem
Use 12 to select [CLEAN
•
CARD], and press the  button.
CARD SETUP
Take out the card, wipe the
contact area (p. 64) with a soft,
dry cloth, and then load the card
CLEAN CARD
FORMAT again.
Use 12 to select [FORMAT],
•
SET OK
and press the  button. Next,
use 12 to select [YES], and
then press the  button.
MEMORY SETUP
IN Internal memory problem
Use 12 to select [MEMORY
FORMAT], and press the  button.
POWER OFF
Next, use 12 to select [YES],
MEMORY FORMAT
and press the  button.
SET OK
L
Internal memory/Card problem
Take pictures before viewing them.
NO PICTURE
Problem with selected image
Use photo retouching software,
r
etc., to view the image on a
PICTURE
computer. If the image still cannot
ERROR
be viewed, the image fi le is
corrupted.
r
Problem with selected image
Use photo retouching software,
THE IMAGE
CANNOT etc., to edit the image on a
BE EDITED computer.
Operation problem
Close the battery/card compartment
cover.
CARD-COVER
OPEN
Corrective action
*1
*1
*2
*2
g
Battery problem
BATTERY
Charge the battery.
EMPTY
Connection problem
Connect the camera and computer
NO
or printer correctly.
CONNECTION
Printer problem
Load paper into the printer.
NO PAPER
Printer problem
Refi ll the ink in the printer.
NO INK
Printer problem
Remove the jammed paper.
JAMMED
Printer problem
SETTINGS
Return to the status where the
*3
CHANGED
printer can be used.
Printer problem
Turn off the camera and printer,
check the printer for any problems,
PRINT ERROR
and then turn the power on again.
r
Problem with selected image
*4 Use a computer to print.
CANNOT PRINT
*1
Before erasing important images, download them to a
computer.
*2 All data will be erased.
*3
This is displayed, for instance, when the printer's paper
tray has been removed. Do not operate the printer
while making the print settings on the camera.
*4
This camera may be unable to print images taken by
other cameras.
EN 59