Outlet; Canister Support - Grizzly G0548 Instruction Manual

Outlet

Components and Hardware Needed:
Metal "L" Outlet ................................................1
Flange Bolts 5 ⁄ "-18 x
16
Rubber Gasket ..................................................1
Tools Needed:
Wrench or Socket 12mm....................................1
To install the metal "L" outlet:
Place the rubber gasket around the impeller
1.
outlet rim as shown in Figure 9.
Figure 9. Placing rubber gasket over outlet.
2. Secure the metal "L" outlet in place with the
flange bolts (Figure 10).
Figure 10. Metal "L" outlet attached to impeller.
-14-
1 ⁄ "....................................8
2

Canister Support

Qty Components and Hardware Needed:
Base ..................................................................1
Canister Support ................................................1
Flange Bolts
Tools Needed:
Wrench or Socket 12mm....................................1
To install the canister support brace:
Place the canister support over the holes on
1.
the base edge (Figure 11).
Figure 11. Canister support attached to base.
2. Secure the canister support in place with the
flange bolts.
5 1
⁄ "-18 x ⁄ "....................................2
16 2
G0548 2 HP Dust Collector
Qty