Dual Time - Citizen 085X User Manual

MODELS: JN301X???? Sports Chronograph
SETTING INSTRUCTIONS
IMPORTANT NOTE
The analog time (large hour and minute hand and 24 hour hand) cannot be set independently of the digital time and so the dig-
ital time must be set first in order for hands to be correct.
TO SET DIGITAL TIME
Press and release M to move mode indicator hand to TME (Time). Pull mode button out to setting position. The Watch stops and
the second figures in digital display II start blinking. Press and release C to reset seconds. Press and release A, digital display
I now shows hours and digital display II shows minutes with the minutes blinking. Press C to advance minutes. For fast advance,
hold C down. Press and release A, hour figures in digital display I will begin blinking. Press C to advance hours (hours are dis-
played in the 24 hours system only). Press M in to finalize time setting. The second, minute, hour and 24 hour hands will auto-
matically move to match the digital time.
NOTE
If hands do not match digital time, all reset procedure must be followed.
ALL RESET AND ZERO POSITIONING
Press and release mode button to move mode indicator to 'SPL' chronograph split mode. Pull mode button out to setting posi-
tion and press and hold A, B and C down for 3 seconds, then release them. Digital displays I and II will be blank while e buttons
are pressed but when buttons are released, all digital segments in both displays will be highlighted (black). Press and release
B to enter 'O' correction mode, digital display I show 'H'. Minute, hour and 24 hour hands(move in unison) can be moved clock-
wise by pressing A and counterclockwise by pressing C. Move hands until 24 hour hand in on 24 and hour and minute hands
are on 12. Press and release B, digital display I shows 'S'. Press A or C to move second hand to the 'O' position (12 o'clock).
Press and release B, digital display I will show 'F'. Press A or C to move function hand to 'O' position. Press mode button in, to
finalize all reset procedure. After all reset, digital time, calendar, alarm time, local time and local time alarm must be reset.
TO SET CALENDAR
Press and release the mode button to move mode indicator hand to CAL. Digital display I shows month and digital display II
shows date. Pull mode button out, month number starts blinking. Press C to advance month. Press and release A, date starts
blinking. Press C to advance date. Press and release A, digital display I shows first two number and digital display II shows last
two numbers of the year and year numbers will be flashing. Press C to advance year. After mode button is pressed in, digital dis-
plays show month number and date. (In time mode digital displays show day of week and date).
TO SET ALARMS (ALM OR L.AL)
Using mode button, move the mode indicator hand to ALM(or L.AL). Pull mode button out, the hours in digital display I will blink.
Press C to advance hours. Press and release A, minutes in digital display II will blink. Press C to set minutes. Setting alarm time
sets alarm to on. Press mode button in to finalize setting. To switch alarm off or on while in alarm mode, press C. Hours in alarm
mode are displayed in 24 hour system only. While in alarm mode, digital display II shows alarm 'of' or 'on' status.
For further instructions, see instruction manual.
CITIZEN WATCH EUROPE GmbH
Hans-Duncker-Strasse 8, D-21035 Hamburg
Tel. 040/734 62-277/278/279
CAL. No.
Features include:
• ANALOG AND DIGITAL DISPLAYS
• CALENDAR
• ALARM
• 24 HOUR 1/100 SECOND
CHRONOGRAPH
• 60 MINUTE COUNTDOWN TIMER

• DUAL TIME

• DUAL TIME ALARM
• HAND RETRACTOR
© 1999 Citizen Watch Company Europe
USER'S GUIDE
Internet http://www.citizenwatch.de