Important Note; All Reset - Citizen 085X User Manual

MODELS: JN0040-07L Navihawk
SETTING INSTRUCTIONS

IMPORTANT NOTE

The analog time (large hour and minute hand and 24 hour hand) cannot be set independently of the digital time. The digital time
must be set first in order to set analog time.
TO SET TIME
Press and release M to move indicator hand to time (TME) then set city code to one representing your time zone. Press and
release A to change city code Eastward and C to move Westward. When city code has been selected, pull M out. Hour, minute
and figures will all flash. Press and release C to select daylight or standard time (summer indicates daylight). Hour hand will move
accordingly. Press and release A, seconds will blink. Reset seconds by using C. Press and release A, minutes will blink. Use C
to advance minutes. For fast advance, hold C down. Press and release A, hours will blink. Use C to advance hours. Note AM
or PM. Press and release A, 12H or 24H will blink. Use C to select AM/PM time (12H) or military time (24H). Press M in to final-
ize setting of digital time. All other cities are adjusted automatically when one city is set to correct time, including the UTC ana-
log display. If you want analog (hands) time to indicate the time in your zone (city code), press A and C simultaneously. The dig-
ital time (your time zone) will be switched to the analog display and vise versa. City code and digital time can now be changed
to your time zone by using A (Eastward) or B (Westward). Both analog and digital time now match.
TO SET CALENDAR
Using M, move the mode indicator hand to CAL. Note city code. If needed, use A to move city code Eastward and C to move
Westward. Pull M out to setting position, month number will flash. Correct month by using C. Press and release A, date will flash.
Correct date by using C. Press and release A, year will flash. Use C to correct year. Press M in to finalize calendar setting. Year
will disappear and day will be shown in its place.
TO SET THE ALARMS
Use M to move the mode indicator to AL-1. Use A or C to select city code. Pull M out to setting position, display blinks. Use C
to set alarm on or off. Press and release A, hours will blink. Correct hours with C. Press and release A, minutes will blink. Correct
minutes with C. Press M in to finalize alarm setting. Alarms 2 and 3 are set in the same way as alarm 1. When alarms sound,
press any button to stop sounding alarm.

ALL RESET

Press and release M to move mode indicator to (SET), Pull M out. Hold A, B and C down simultaneously for 3 seconds, then
release them. All digital segments will be highlighted. Press and release B to reset all segments to zero and display UTC. Hold
A down to align the UTC hour and minute hand to 24:00. Press and release B to display HR (hours). Hold A down to align the
24 am/pm hour hand to 24:00. Press and release B to display MIN (minutes). Hold A down to align minute hand to zero. Press
in M to finalize zeropositioning. Watch will beep confirming all reset and zero positioning.
For further instructions, see instruction manual.
CITIZEN WATCH EUROPE GmbH
Hans-Duncker-Strasse 8, D-21035 Hamburg
Tel. 040/734 62-277/278/279
CAL. No.
Features include:
• 30 CITIES/22 TIME ZONES
• ANALOG AND DIGITAL DISPLAYS
• CALENDAR
• 3 ALARM
• 24 HOUR 1/100 SECOND CHRONOGRAPH
• 60 MINUTE COUNTDOWN TIMER
• ANALOG GREENWICH TIME
• HAND RETRACTOR
• ZONE SETTING MODE
© 1999 Citizen Watch Company Europe
USER'S GUIDE
Internet http://www.citizenwatch.de