User's Manual
7.9 PrintSir Cfg - PrintSir Network Ability Setting
The PrintSir Cfg page allows you to set:
7.10 Restore Default - Restore to Default
T h e D i a g n o s t i c P r i n t o u t , w h i c h d e t e r mi n e s w h e t h e r o r n o t a
diagnostic printout should be printed on the printer to which the
PrintSir is connected.
The TCP/IP Support, which determines whether or not TCP/IP
network printing is supported
The NetWare Support, which determines whether or not NetWare
network printing is supported
The NetBEUI Support, which determines whether or not NetBEUI
network printing is supported
The Write button: save the configuration to the PrintSir.
The Reset button: reset the PrintSir to let the changes take effect.