CNET CQR-981 User Manual page 96

Item
IP Address
Subnet Mask
Default Gateway
DHCP
DHCP Client Range
Static DHCP
Device Name
802.1d Spanning Tree
Clone MAC Address
Apply Changes & Reset
The default IP address is 192.168.1.254
Please enter the Subnet Mask address
Please enter the Default Gateway address for LAN interface.
Click to select Disabled, Client or Server in different operation mode
of LAN access point.
Fill in the start IP address and end IP address to allocate a range of IP
addresses; client with DHCP function set will be assigned an IP
address from the range
Configures how static DHCP address are assigned to client (only
available when DHCP server is enabled)
Configures the device name of the router.
IEEE 802.1d Spanning Tree Protocol (STP) is a link layer network
protocol that ensures a loop-free topology for any bridged LAN, This
function is optional.
If your ISP asks you to enter a specific MAC Address, please input the
correct info at the column.
Click on Apply Changes to save the setting data. Or you may click on
Reset to clear all the input data.
96
Description