Table of Contents
Advertisement
Password
Service Name
Connection Type
Idle Time
MTU Size
DNS
3.5G Backup
Service
Connect Speed
SIM PIN / Retype SIM PIN
APN
Input your Password supplied by ISP
Input the service name supplied by ISP.
It has three types: Continuous, Connect on
Demand, and Manual.
It is the time of inactivity before disconnecting your
PPPoE session. Enter an Idle Time (in minutes) to
define a maximum period of time for which the
Internet connect is maintained during inactivity. If the
connection is inactive for longer than the defined Idle
Time, then the connection will be dropped. Either set
this to zero or enable Auto-reconnect to disable this
feature.
MTU stands for Maximum Transmission Unit. For
PPPoE connection, the default MTU should be
provided
by
computer
(OS). Advanced users can set the MTU manually for
increasing the internet performance. The largest
number allowed by Ethernet at the network layer is
1492 byte
If ISP provides you DNS information, please select
Attain DNS automatically, otherwise select Set DNS
Manually and input the DNS information into the
blank.
Check this option to allow failover Internet connection
support with 3.5G. By default the router checks the
connectivity every 3 minutes, if the connection fails
then the router will attempt to establish a 3.5G
connection for backup purpose.
Select
(HSDPA/CDMA2000/TD-SCDMA).
Select Preferred 2G/3G/3.5G connection speed.
Enter the PIN code of your SIM card here.
Enter the Access Point Number provided by your ISP,
34
operating
service
systems
type.
Hide quick links:
Advertisement
Table of Contents
