Wireless Site Survey; Wireless Security Setup - CNET CQR-981 User Manual

IAPP
Protection
Aggregation
Short GI
RF Output Power
Apply Changes & Reset

6.2.3 Wireless Site Survey

This function provides users to search existing wireless APs or wireless base stations from ISP. You
can connect to a wireless AP manually in Wi-Fi AP mode. The designed AP will appear on SSID column
in Wireless Basic Setup page.
Please click on Refresh to refresh the list. Click Connect after select an existing AP to connect.

6.2.4 Wireless Security Setup

4 encryption types could be selected here, please follow below instructions for the setting.
option improves throughput performance. Select the suit Preamble as
Short or Long Preamble.
Inter Access Point Protocol. Allow seamless roaming between Access
Points in your wireless network.
Please select to enable wireless protection or not.
Enable this function will combine several packets to one and transmit
it. It can reduce the problem when mass packets are transmitting.
Users can get better wireless transmission efficiency when they enable
this function.
Users can adjust the RF output power to get the best wireless
connection. Users can choose from 100%, 70%, 50%, 35%, and 15%.
Click on Apply Changes to save the setting data. Or you may click on
Reset to clear all the input data.
138