Table of Contents
Advertisement
Item
Disable Wireless LAN
Interface
Band
Mode
SSID
Channel Width
Control Sideband
Channel Number
Broadband SSID
Data Rate
Associate Clients
Enable MAC Clone (Single
Ethernet Client)
Enable Universal Repeater
Mode (Acting as AP and
Client simultaneously)
SSID of Extended Interface
Apply Change & Reset
Turn off the wireless service.
Please
select
the
(B/G/N/B+G/G+N/B+G+N).
Please select the mode. It has 3 modes to select:(AP, Client, WDS,
AP+WDS).
Multiple APs provides users another 4 different SSID for connection.
Users can add or limit the properties for each connection. Please
check Section 5.2.1.1
Service Set identifier, the default SSID is CNet, users can define to
any.
Please select the channel width, it has 2 options: 20MHZ, and 40MHZ.
Enable this function will control your router use lower or upper
channel.
Please select the channel; it has Auto, 1, 2~11 or 13 options.
User may choose to enable Broadcast SSID or not.
Please select the data transmission rate.
Check the AP connectors and the Wireless connecting status.
Clone the MAC address for ISP to identify.
Allow to equip with the wireless way conjunction upper level, provide
the bottom layer user link in wireless and wired way in the meantime.
(The IP that bottom layer obtains is from upper level.) Please check
Section 5.2.1.2
While linking the upper level device in wireless way, you can set SSID
to give the bottom layer user search.
Click on Apply Changes to save the setting data. Or you may click on
Reset to clear all the input data.
85
Description
frequency.
It
has
6
options:
2.4
GHz
Hide quick links:
Advertisement
Table of Contents
