CNET CQR-980 User Manual page 117

Item
Enable Log
System all, Wireless, & DoS
Enable Remote Log
Log Server IP Address
Apply Changes & Refresh &
Clear
* The following figure is an example when users click Apply Changes to record the event log.
Please select to enable log function.
You may choose to enable Event Log or not.
Please select the event you want to record.
You may choose to enable the remote event log or not.
Please input the log server IP Address.
Click on Apply Changes to save the setting data. Click on Refresh to
renew the system time, or on Clear to clear all the record.
117
Description