Alto X34 User Manual page 10

no patch cold required
110-120V
AC INPUT
220-240V
95-120V /210-240V 60-50Hz
Rated Power Consumption 10W
FUSE:
210-240V: T100mAL 250VAC
95-120V: 200mA 250VAC
REPLACE FUSE WITH CORRECT
TYPE ONLY
NOTE: Do not connect anything to INPUT 2.
Do not connect anything from LOW OUT 1 and from MID OUT 1
(These inputs/outputs are automatically normalled when unplugged).
The same time, please pay more attention to the front panel control, for it is really different from the 3-way
stereo application .
Front Panel
INPUT 1
LOW Gain 1
LOW-MID XOVER FREQ 1
MID Gain 1
MID-HIGH XOVER FREQ 1
HIGH Gain 1
INPUT 2
LOW Gain 2
LOW-MID XOVER FREQ 2
MID Gain 2
MID-HIGH XOVER FREQ 2
HIGH Gain 2
MID AMP
HIGH MID
PHASE PHASE
3WAY- STEREO
HIGH OUT 2 / (MID OUT) MID OUT 2 / (LOW OUT) LOW OUT 2 / (SUB OUT)
/ (4WAY- MONO)
CHANNEL 2
SUB AMP
main input control
set to 0 and Mute
(not used)
set to 0 and Mute
MID-HIGH Crossover control
High frequency amplifier level control
set to 0
Sub frequency amplifier level control
SUB-LOW Crossover control
Low frequency amplifier level control
LOW-MID Crossover control
Mid frequency amplifier level control
LOW AMP
PUSH
STEREO MONO
NEW TIDE
CD HIGH MID
3
BOOST MODE 2 1 PHASE PHASE
INPUT 2 / (NOT USED) HIGH OUT 1 / (HIGH OUT) MID OUT 1 (NOT USED)
MONO
MODE
9
HIGH AMP
PUSH
NEW TIDE
CD
3
BOOST 2 1
LOW OUT 1 / (NOT USED) INPUT 1 / (INPUT)
CHANNEL 1
MIXER