Rack Mounting; Application ...................... ............................................................................ .............7 - Alto X34 User Manual

a. Wiring Configuration
Either the 1/4" TRS (Tip-Ring-Sleeve) jack or the XLR servo connector can be wired in balanced and
unbalanced modes. Please wire your systems as the following examples:
For 1/4" TRS jack
For XLR connector
b. In Line Connection
For these applications, the X34 Active Crossover provides XLR connectors to easily interface with most
professional audio devices. Follow the configuration examples below for your particular connection.
Balanced
TIP RING SLEEVE
TIP RING SLEEVE
Unbalanced
TIP RING SLEEVE
TIP SLEEVE
TIP SLEEVE
TIP RING SLEEVE
TIP SLEEVE
TIP RING SLEEVE

4.3. Rack Mounting

The most secure mounting is on a universal rack shelf available from various rack manufactures or your
music dealer. The X34 Active Crossover fits into one standard 19" rack unit of space. Please allow at least
an additional 4" depth for the connectors on the rear panel. Be sure that there is enough air space around
the unit for sufficient ventilation and please do not place the X34 Active Crossover on high temperature
devices such as power amplifiers etc. to avoid overheating.
1/4"TRS jack
Unbalanced Input
XLR Unbalanced Input
SLEEVE RING TIP
SLEEVE TIP
SLEEVE RING TIP
1/4"TRS jack
Balanced Input
XLR Balanced Input
Tip
Ring
Sleeve
1
2
3
Tip
Ring
Sleeve
Tip
Ring
Sleeve
Tip
Sleeve
1
2
3
Tip
Sleeve
Tip
Ring
Sleeve
Tip
Sleeve
Tip
Ring
Sleeve
1
2
3
7
Tip
Ring
Sleeve
1
2
3
1
2
3
1
2
3
1
2
3
Centre
Screen
Tip
Sleeve
Tip
Ring
Sleeve
Centre
Screen
Centre
Screen
1
2
3