Installing Cutters
To install a cutter in the spindle:
1.
2.
3.
4.
5.
44
Figure 45
Note: Overtightening the drawbar makes
removal difficult and stretches the threads of
the arbor and the drawbar.
Figure 44.
6.
Figure
Removing Cutters
To remove a cutter from the spindle:
1.
2.
3.
DO NOT completely unscrew the drawbar
prior to striking the drawbar or the initial
threads of the drawbar and tool will be
crushed.
4.
5.
Figure 45.
ON
NOTICE