Table of Contents
Advertisement
Poor battery contact
Automatic
Seriously poor battery charge
power-off
Deceasing
performance
Inadequate standby
time
Poor network signal
Poor network service area
Network connecting
failure
Out of the service area
No service
PTT call failure
Network connecting failure
Call drop during a
Poor network signal
call
The phone is set as Silence, or
No
ring
for
a
the volume for incoming call
incoming call
ringtone is set 0.
R-UIM card is locked caused
Prompt
to
input
by successive inputting false
PUK
PIN code for three times.
If the problems cannot be solved after the above handling, you may contact your seller or network operator, or feed
back your information directly by sending emails to
you as fast as possible and provide you with good after-sales services.
Handset User Manual
Re-install the battery
Recharge the battery
of
battery
Replace the battery
Switch off the power as possible in case of
poor network signal
Move to other place
Confirm whether it is in the CDMA network
service area
Contact with operators
See "Network connecting failure"
Move to other places
Enter Profiles and set the mode as
non-mute; Or check ringtone volume.
Contact with operators.
zte_mobile@zte.com.cn
41
for customer service. We will reply to
http://www.zte.com.cn
Advertisement
Table of Contents
