Using The Tv; Scanning For Tv Channels Automatically (Only Appears To The First Time Power On); Tv Channel Setting - Venturer KLV3915 Owner's Manual

Connect a TV antenna or CATV cable or Satellite system to the TV antenna terminal before scanning
for TV channels

Scanning for Tv Channels Automatically (Only appears to the first time Power On)

1. Connect the TV antenna.
2. Connect the AC power cord.
3. Press the ON/Off button to turn on the unit.
4. Press the DVD/TV/RADiO button (the fUNCTiON button on the remote
control) to select TV mode.
5. Press the button to select "Yes".
6. Press the ENTER button.
or
7. Press the button to select Antenna.
8. Press the or button to select Air or Cable.
or
9. Press the button to select Auto Scan.
10. Press the button to enter.
11. Press the /ENTER button.
12. The unit will immediately search all channels for those with adequate
signal strength and store those channels with signals in memory. The unit
will take a short minutes to finish auto scan and after this is completed,
the unit will switch to the first channel found.

Tv Channel Setting

1. Press the TV MENU button.
2. Use the or button to select TV.
3. Use the or button to select the options (Antenna / Auto
Scan / Auto Scan Add CH / Channel Skip / Channel No.
/ Channel Label / DTV Signal).
4. Use the or button to make adjustment. The screen will
change to your selected mode immediately. Press the TV
MENU button to return to the previous menu.
5. Repeat steps 2 to 4 to adjust other options.
6. To exit the MAIN MENU and return to the normal screen,
press the EXiT button on the remote control.
NOTE: Channel No. : 2-69 Channel for Air, 1-135 Channel for
Cable.
Antenna :
Auto Scan :
Auto Scan Add CH:
If you have selected Cable in Antenna, then you can select Cable System (AUTO / STD / HRC / IRC) in the
submenu. We recommend you pick "AUTO". "HRC" and "IRC" are custom station frequencies used by some
Cable Service Providers. "STD" refers to the standard frequencies used by many Cable Service Providers.
"AUTO" will cause the product to scan all frequencies.
Channel Skip:
Channel No.:
DTV Signal:
KLV39123 Eng IB Generic.indd 24

USiNG THE TV

Select "Cable" to receive cable signals. Select "Air" to receive "over the air" (broadcast)
signals.
Automatically scan all channels for those with adequate signal strength.
The already-stored channels will not be cleared and the newly-scanned channels will
be added.
You may switch ON/OFF the skip function of each stored channel by selecting the
channel with or button (and using
of stored channels is more than 1 page), and followed with pressing the ENTER
button.
Select a different TV channel.
Display the signal strength (for digital TV channels only).
or button to select page if the amount
23
Picture Audio Time Setup P P arental TV
Antenna Air
Auto Scan
Auto Scan Add CH
Channel Skip
Channel No.
Channel Label
DTV Signal
Select Adjust MENU Return
Picture Audio Time Setup P P arental TV
RF CH 11
Found
0
Select "ENTER" Adjust MENU Retur n
Picture Audio Time Setup P P arental TV
Antenna Air
Auto Scan
Auto Scan Add CH
Channel Skip
Channel No.
Channel Label
DTV Signal
Select Adjust MENU Return
Picture Audio Time Setup P P arental TV
Antenna Cable
Auto Scan
Auto Scan Add CH
Channel Skip
Channel No.
Channel Label
DTV Signal
Select Adjust MENU Return
8/11/2009 9:33:15 AM