Table of Contents
Advertisement
Fuse Replacement
With a flat head screwdriver wedge the fuse
holder out of its housing. Remove the damaged
fuse from its holder and replace with exact
same type fuse. Insert the fuse holder back in
its place and reconnect power.
Mounting
O RI ENT AT I O N
This fixture should only be mounted/used on a flat surface. This fixture may not be tilted.
RI G G I NG
It is important never to obstruct the vents' pathways. Mount the fixture using, a suitable "C" or "O"
type clamp.
When selecting installation location, take into consideration the fluid reservoir access and routine
maintenance.
Safety cables must always be used, utilizing the provided safety eye bolt.
Never mount in places where the fixture will be exposed to rain, high humidity, extreme temperature
changes or restricted ventilation.
Hanging Clamp
Note!
Clamp is sold separately.
Hurricane™ 1100 User Manual
Disconnect the power cord before replacing a fuse and always
replace with the same type fuse.
Angled Down
The fuse is located
inside this
compartment.
Remove using a flat
head screwdriver.
Angled Up
6
3/26/2009 3:17 PM
Advertisement
Table of Contents
