Dynaudio Contour Owner's Manual page 12

POSITIONING
6. Multi Channel Setup
For a multi channel setup, in addition to the two main (stereo) loud-
speakers, additional channels (speakers) may be added to reproduce
dialogue and surround effects.
With the Contour center channel and compact models, it is possible to
achieve the same high level of performance and sound on every channel.
The center is responsible for the information directed from the middle
of the screen and should be positioned between the right and left main
loudspeakers. In a home theater/surround setup, the center supports
the images and should be placed as close as possible to the screen.
The Contour center models are magnetically shielded and therefore
can be placed near TV sets or other sensitive electronics without any
negative effects or influence. Due to the integrated adjustable base
plate construction, the center speaker allows ideal flexibility for opti-
mal positioning, either above or below the screen.
With various surround formats, such as Dolby Digital EX, DTS ES, etc.,
the Contour Center can also be utilized as a rear center channel.
The additional rear speakers are responsible for the rear sound effects
behind the listening position. Corresponding to the particular surround
format, you may have to add speakers on both sides between the front
and rear channel speakers.
In general, every Contour loudspeaker can be used as a main or rear
channel solution, but the Contour S R is a perfect choice for a surround
rear channel because of its shape and its compact design.
12 DYNAUDIO_Contour POSITIONING
Most often a subwoofer will be utilized for the LFE-signal in such
setups, especially in larger listening rooms. The position of the sub-
woofer will be dependent upon the size of the room and its acoustics.
Dynaudio recommends placing the subwoofer close to the front spea-
kers, but not too close to any walls, corners or furniture. This helps
make it easier to sonically integrate the subwoofer into the existing
surround channel setup.
Because there are many different set up options - from 5.1 to 10.2
channel applications - and the fact that loudspeaker positioning will
also depend upon the room's shape, please consult your trained
Dynaudio dealer for special applications and for placement options and
possibilities.
7. Loudspeaker Toe-In
Depending on your personal listening environment and room dimen-
sions, the Contour loudspeakers may be angled in towards the liste-
ning area to focus the sound radiation.
This positioning will typically improve imaging and is especially recom-
mended by Dynaudio.