Section 1: Safety; Safety Instructions For Pneumatic Tools - Grizzly G0464 Instruction Manual
Grizzly instruction manual air compressor g0464, g0465, g0467, g0468, g0470
Hide thumbs
Also See for G0464:
- Parts breakdown (2 pages) ,
- Parts breakdown (2 pages) ,
- Parts breakdown (2 pages)
Table of Contents
Advertisement
SECTION 1: SAFETY
For Your Own Safety Read Instruction Manual
Before Operating This Equipment
The purpose of safety symbols is to attract your attention to possible hazard-
ous conditions. This manual uses a series of symbols and signal words which
are intended to convey the level of importance of the safety messages. The
progression of symbols is described below. Remember that safety messages by
themselves do not eliminate danger and are not a substitute for proper accident
prevention measures.
NOTICE
Safety Instructions for Pneumatic Tools
1. READ THROUGH THE ENTIRE
MANUAL
MACHINERY. Machinery presents
serious injury hazards to untrained
users.
2. ALWAYS USE ANSI APPROVED
SAFETY
GLASSES
OPERATING MACHINERY. Everyday
eyeglasses only have impact resistant
lenses, they are NOT safety glasses.
3. ALWAYS
APPROVED RESPIRATOR WHEN
OPERATING MACHINERY THAT
PRODUCES DUST. Wood dust is a
carcinogen and can cause cancer and
severe respiratory illnesses.
4
-
-
Indicates an imminently hazardous situation which, if
not avoided, WILL result in death or serious injury.
Indicates a potentially hazardous situation which, if
not avoided, COULD result in death or serious injury.
Indicates a potentially hazardous situation which, if
not avoided, MAY result in minor or moderate injury.
It may also be used to alert against unsafe practices.
This symbol is used to alert the user to useful infor-
mation about proper operation of the equipment.
BEFORE STARTING
WHEN
WEAR
AN
Model G0464/G0465/G0467/G0468/G0470 Air Compressors
4. ALWAYS
PROTECTION WHEN OPERATING
MACHINERY. Machinery noise can
cause permanent hearing damage.
5. WEAR PROPER APPAREL. DO NOT
wear loose clothing, gloves, neckties,
rings, or jewelry which may get caught
in moving parts. Wear protective hair
covering to contain long hair and
wear non-slip footwear.
ANSI
6. NEVER OPERATE MACHINERY
WHEN TIRED, OR UNDER THE
INFLUENCE
ALCOHOL. Be mentally alert at all
times when running machinery.
USE
HEARING
OF
DRUGS
OR
Advertisement
Table of Contents
