Advertisement
1 ： IMPORTANT SAFETY INSTRUCTIONS
IMPROPER OPERATION OR MAINTENANCE OF THIS PRODUCT COULD RESULT IN SERIOUS INJURY
AND PROPERTY DAMAGE。
READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE INSTALLING OR USING YOUR AIR
COMPRESSOR UNIT. IT CONTAINS VALUABLE INFORMATION THAT WILL HELP YOU IN SAFELY
RECEIVING, INSTALLING, USING, AND MAINTAINING YOUR UNIT. KEEP THIS BOOKLET IN A SAFE
PLACE FOR FUTURE REFERENCE。
1-1： RISK OF FIRE
●
DO NOT SPRAY COMBUSTIBLE OR FLAMMABLE LIQUID IN A CONFINED AREA;
SPRAY AREA MUST BE WELL-VENTILATED.
●
DO NOT SMOKE WHILE SPRAYING OR SPRAY WHERE SPARK OR FLAME IS
PRESENT.
●
KEEP COMPRESSOR AT LEAST 12-18 INCHES AWAY FROM SPRAYING AREA
AND ALL EXPLOSIVE V APORS.
1-2： RISK OF ELECTRICAL SHOCK
●
DISCONNECT COMPRESSOR FROM ELECTRICAL SUPPLY CIRCUIT BEFORE
SERVICING.
●
DO NOT EXPOSE COMPRESSOR TO RAIN OR OPERATE IN A WET AREA.
●
NEVER USE THE AIR COMPRESSOR WITHOUT CONNECTION TO A PROPERLY
GROUNDED OUTLET WITH THE SPECIFIED VOLTAGE AND FUSE PROTECTION.
●
THE COMPRESSOR MUST BE LOCATED A MINIMUM OF 12-18 INCHES FROM
ANY SOURCE OF POTENTIALLY EXPLOSIVE VAPORS.
●
IMPROPER GROUNDING CAN RESULT IN ELECTRICAL SHOCK.
1-3： RISK OF EXPLOSION
●
DRAIN TANK DAILY; CONDENSED WATER WILL CAUSE RUSTING
AND RISK OF TANK RUPTURE OR EXPLOSION.
●
DO NOT REPAIR, MODIFY OR WELD TANK. RETURN TO
AUTHORIZED SERVICE CENTER IF REPLACEMENT IS REQUIRED.
●
DO NOT ADJUST REGULATOR TO RESULT IN OUTPUT PRESSURE
GREATER THAN MARKED MAXIMUM PRESSURE OF ATTACHMENT
TOOL.
●
PRESSURE SWITCH IS SET AT THE FACTORY FOR OPTIMUM PERFORMANCE
OF YOUR PARTICULAR MODEL. NEVER BYPASS OR REMOVE PRESSURE
SWITCH, AS SERIOUS DAMAGE TO EQUIPMENT OR PERSONAL INJURY
COULD RESULT FROM TOO HIGH OF PRESSURE.
3
●
BEFORE STARTING COMPRESSOR, PULL SAFETY VALVE RING TO MAKE SURE
THE VALVE MOVES FREELY. THE SAFETY VALVE IS FACTORY-INSTALLED TO
PROTECT THE AIR RECEIVER FROM DAMAGE, SHOULD MALFUNCTION OCCUR
IN THE PRESSURE SWITCH. SWITCH IS FACTORY SET AT A SPECIFIC LIMIT FOR
YOUR PARTICULAR MODEL, AND SHOULD NEVER BE TAMPERED WITH.
ADJUSTMENT BY USER WILL AUTOMATICALLY VOID WARRANTY.
1-4 ： RISK OF BURNS
●
HOT SURFACES CAN CAUSE SERIOUS INJURY. NEVER TOUCH ANY EXPOSED
METAL PARTS ON COMPRESSOR DURING OR IMMEDIATELY AFTER OPERATION;
TOUCHING THESE AREAS MAY CAUSE SEVERE BURNS.
●
DO NOT REACH AROUND PROTECTIVE SHROUDS OR ATTEMPT MAINTENANCE
UNTIL UNIT HAS BEEN ALLOWED TO COOL.
1-5： RISK OF BREATHING
●
DO NOT USE COMPRESSED AIR FOR BREATHING. WHEN SPRAYING, USE
RESPIRATOR/LUNG PROTECTION IN A WELL-VENTILED AREA.
●
COMPRESSOR AIR FROM THE UNIT MAY CONTAIN POISONOUS VAPORS WHICH
ARE NOT SUITABLE TO INHALE AND COULD BE HARMFUL TO YOUR HEALTH.
●
WORK IN AN AREA WITH GOOD CROSS-VENTILATION.
1-6： RISK FROM MOVING PARTS
●
UNIT STARTS AUTOMATICALLY; DO NOT OPERATE WITH GUARDS OR COVERS
REMOVED OR BROKEN.
●
ANY REPAIRS REQUIRED ON THE PRODUCT SHOULD BE PERFORMED BY
AUTHORIZED SERVICE CENTER PERSONNEL.
●
DO NOT TOUCH MOVING PARTS.
1-7： RISK FROM FLYING OBJECTS
●
ALWAYS WEAR ANSI Z87.1-APPROVED SAFETY GLASSES WITH SIDE SHIELDS
WHEN USING THE AIR COMPRESSOR. ALWAYS WEAR PROPER SAFETY
EQUIPMENT WHILE USING THE COMPRESSOR.
●
DO NOT DIRECT AIR STREAM TOWARD ANY PARTS OF THE BODY OR AT OTHER
PEOPLE.
●
UNPLUG POWER CORD AND DRAIN ALL AIR PRESSURE FROM TANK BEFORE
SERVICING AND AFTER EACH USE.
1-8： RISK OF PROPERTY DAMAGE WHEN TRANSPORTING COMRPESSOR
●
ALWAYS PLACE COMPRESSOR ON A PR OTECTIVE MAT WHEN TRANSPORTING
TO PROTECT AGAINST DAMAGE TO VEHICLE FROM LEAKS.
●
NEVER OPERATE COMPRESSOR ON A R OOF OR OTHER ELEVATED POSITION.
●
ALWAYS OPERATE COMPRESSOR IN A STABLE POSITION TO PREVENT
ACCIDENTAL MOVEMENT OF THE UNIT.
4
Advertisement
