Battery Information - Wyse Mobile Thin Computer User Manual

iv
Cable Notice
The use of shielded I/O cables is required when connecting this equipment to any and all optional peripheral or
host devices. Failure to do so may cause interference and violate FCC and international regulations for
electromagnetic interference.
Device Power Supply
Model XX0 thin computers use an external power adapter. Use only with Wyse approved power adapters (refer
to the Wyse Web site).

Battery Information

Model XX0 thin computers contain a replaceable battery. The battery is designed to work with your Wyse thin
computer. Do not use a battery from other thin computers with your thin computer. Replace the battery only with
a compatible battery purchased from Wyse (refer to the Wyse Web site).
Caution
Replace power adapter with the same or equivalent type as recommended by the manufacturer.
Warning
There is a risk of explosion if the battery is replaced by an incorrect type. Always dispose of used
batteries according to the instructions accompanying the battery.
Caution
Misuse of the battery may increase the risk of fire of chemical burn. Do not puncture, incinerate,
disassemble, or expose the battery to temperatures above 65°C (149°F). Keep the battery away
from children. Handle damaged or leaking batteries with extreme care. Damaged batteries may
leak and cause personal injury or equipment damage.