Dual Displays; S3Tray Plus - Wyse Mobile Thin Computer User Manual

20
Chapter 3

Dual Displays

An external monitor may be used simultaneously with your thin computer's display. You
may also use the external monitor only and disable the display or only use the display. To
do this you may first need to enable the multiple display settings in Windows XP
Embedded.
1. Open the Control Panel.
2. Double-click S3 Tray Plus tab.
3. Click the S3 Display button.
4. Check the CRT.
Figure 3-8 S3Tray Plus
The options are:
•
•
If the external CRT is connected, the display on the LCD and the CRT is the same.
Single - You can choose which device to apply as the Primary display. In Single mode,
the video display hot key combination is available—you can cycle the video output by
pressing the Fn + F5 keys.
Mirror - In Mirror mode, the video display hot key combination is available—you can
cycle the video output by pressing the Fn + F5 keys.
Note
To ensure trouble-free video output, the first time you use an external
monitor; change the output in the Display Properties dialog box. After
successfully switching modes, you may use the video function keys.
Note
Light or dark dots may appear on the LCD due to technical limitations of LCD
manufacturing. This will not effect normal operation of the LCD.