Connecting To A Network Through A Dun-Capable Mobile Phone - Wyse X90L User Manual

26
Chapter 4

Connecting to a Network through a DUN-Capable Mobile Phone

To connect to a network through a DUN-capable mobile phone:
1. Click Start | Settings | Control Panel | Network Connections to open the Network
2. Click on Create a new connection to open the Network Connection Wizard and click
3. Select the radio button Connect to the Internet and click Next.
4. Select the radio button Setup my Connection manually and click Next.
Figure 4-6 New Connection Wizard
5. Select the radio button Connect using a dial-Up modem, and click Next to open the
Figure 4-7 Connection Name
6. Enter the ISP name and click Next. The ISP name is a user-friendly name (in this
Connections Window.
Next.
New Connection Wizard.
example, "Connect" was used).