Wyse X50L Quick Start Manual

Quick-Start Guide
®
Wyse X Class Mobile Thin Client, Model Xn0L
Products: X50L, X90L, X90LW, X90Le, X90LeW
http://www.wyse.com/manuals
See accompanying documents in the shipping carton for License Agreement and Warranty information. To find the latest Quick-Start Guide, go to
http://www.wyse.com/manuals
Important: A printed copy of the Wyse Technology End User License Agreement is included in the shipping box and provided for your reference only.
The license at http://www.wyse.com/license
the product, you agree to be bound by those terms.
Important: If you use Wyse Device Manager Server software for managing your Wyse thin clients, download the latest version to ensure
compatibility at http://www.wyse.com/download.
Caution: Improper connection, mounting, or use of this product could result in component failure and/or flash memory corruption.
Read Caution Statements before setting up and operating your mobile thin client.
Caution Statements
Improper connection or use of this product could result in component failure or undesired interference. Read the following caution statements before
setting up and operating your mobile thin client.
Setup
•
Do not force a connector into its socket. If any undue resistance is encountered, ensure that the connector is correctly oriented to the receptacle.
•
The main unit is not user serviceable; opening or accessing the case may violate your warranty.
•
For wireless usage and requirements, refer to the regulatory notices in the mobile thin client's documentation.
Venting and Care
•
Allow sufficient space around your mobile thin client for ventilation; do not place your mobile thin client in any enclosure that restricts airflow around the
device, such as a closed briefcase, while the computer is turned on. Restricting airflow can damage your mobile thin client or cause a fire; do not place
any objects on the device or block the vent holes under the device. Find environmental operating specifications in the mobile thin client's datasheet
located at http://www.wyse.com/products.
•
Do not allow your mobile thin client to rest directly on exposed skin for extended periods of time during operation. The base surface temperature will rise
during normal operation (particularly when AC power is used). Prolonged contact with exposed skin can cause discomfort or a burn.
•
To clean your mobile thin client, first disconnect it from the electrical outlet, and then use a soft cloth dampened with water for cleaning. Do not use liquid
or aerosol cleaners.
Power Sources
•
To ensure regulatory compliance, use only the power adapter included in the shipping carton, or a Wyse-approved equivalent, with your mobile thin
client. Refer to the regulatory notices in your mobile thin client's documentation.
•
You can connect the power adapter at any time with the mobile thin client turned either on or off.
•
Do not hard reset your mobile thin client by holding down the power button during normal operation.
•
When turning off your mobile thin client, be sure to perform a complete shutdown (via the user interface). Do not disconnect the AC power cable, DC
power adapter cable, remove the battery, or shut off power at a circuit breaker (including power strips), etc., to turn off the device.
•
Surge protectors for electrical devices are recommended in areas of lightning. However, when lightning is occurring, your equipment should be properly
shut down and unplugged from AC power until the storm has passed.
•
Dispose of your battery properly when it no longer holds a charge or is damaged. Contact your local waste or environmental agency for instructions.
Battery
•
The X class mobile thin clients contain a user-replaceable battery pack that is designed to work with your product. Do not use a battery from other
mobile thin clients or laptop computers. There is a risk of explosion if the battery is replaced by an incorrect type. Replace the battery only with a
compatible battery purchased from Wyse (refer to the Wyse Web site). Always dispose of used batteries according to the instructions accompanying the
battery.
•
The X class mobile thin clients contain an internal button cell battery replaceable by Wyse or one of our Authorized Service Centers. For service, visit
http://www.wyse.com/serviceandsupport/service/service.asp. There is a risk of explosion if the battery is replaced by an incorrect type. Always dispose
of used batteries according to the instructions accompanying the battery.
•
Perchlorate Materials - Special Handling May Be Required under California Code of Regulations, title 22. (Only required within the U.S.A.)
and click on the name of your product.
as of the purchase date is the controlling licensing agreement. By copying, using, or installing the software or