Table of Contents
Advertisement
Remove the hinge cover:
1.
Remove the shield (1) that secures the WWAN antenna cables (2) in the routing channel built
into the top cover.
2.
Remove the six Phillips PM2.0×2.5 screws (2) that secure the hinge cover to the top cover.
3.
Turn the computer right side up, with the front toward you.
4.
Open the computer.
5.
Rotate the display assembly (1) clockwise until it is perpendicular to the computer body.
6.
Detach the left (2) and right edges of the hinge cover from the computer.
7.
Remove the hinge cover (3) by sliding it away from the computer.
60
Chapter 4 Removal and replacement procedures
Hide quick links:
Advertisement
Table of Contents
