Dmx Channel Assignments And Values; 6-Ch; Configuration (Standalone); Automatic Mode - Chauvet Cubix 2.0 User Manual

DMX Channel Assignments and Values

6-CH

Channel
1
2
3
4
5
6
Configuration
Set the product in one of the standalone modes to control without a DMX controller.
1.
(Standalone)
2.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX
signals that could interfere with the DMX signals from the controller.

Automatic Mode

To enable the Automatic Mode, follow the instructions below:
1.
2.
Sound-Active
To enable the Sound-Active mode, do the following:
Mode
1.
2.
3.
Page 10 of 13
Function
000  004 No function
005  028 Red
029  056 Green
057  084 Blue
085  112 Cyan
Colors
113  140 Purple
141  168 Yellow
169  197 White
198  224 3-Color switching
225  255 7-Color switching
000  004 No function
Strobe
005  255 0~30 Hz
000  127 Rotation with indexing
Motor Rotation
128  255
000  014 Blackout
Auto Programs
015  255 Auto Programs
000  015 No function
Auto Program Speed
016  255
000  015 No function
Strobe
016  255 0~30 Hz
Connect the product to a suitable power outlet.
Turn the product on.
Press <MENU> repeatedly until AUTO shows on the display.
Press <ENTER>.
Press <MENU repeatedly until SNd shows on the display.
Press <ENTER>.
Turn the music on and adjust the sound sensitivity knob until the product starts
responding to the beat of the music.
Value Setting
Back and forth with increasing
distance
0~100% (when Ch. 4 is
015~255)
Cubix™ 2.0 User Manual (Rev. 3)
Side Lens
Middle Lens