Remove/Adjust The Quiet Close Assembly - Kohler 2451 Installation And User Manual

Remove/Adjust the Quiet Close Assembly

Top of Door
1
3
Removal
1. Apply a small amount of leverage to the door with one hand to keep
the door in the fully open position. With the other hand, slide the hinge
back towards you, then outward away from the door.
Replacement
2. Apply a small amount of leverage to the door with one hand to keep
the door in the fully open position. With the other hand, slide the tab
on the quiet-close assembly over the slot on the hinge base, then snap
into place over the hinge base.
3. Open and close the door to ensure correct operation.
4. Adjust the bolt on the quiet close assembly to achieve the proper rate
of closure.
Side of Vanity
2
Tabs
9
Slots
4
Closure Rate
Adjustment
Bolt
1067217-W2-B
1067217-060