Remove/Replace The Hinges - Kohler 2451 Installation And User Manual

4. Open and close the door to confirm smooth operation. Adjust the
screws on the hinge assembly as needed.
Adjustment
5. Height - to move the door up or down -Turn the screw either way
on the bottom and top hinge assembly until correct adjustment is
achieved.
6. Side - to move the door to the left or right -Turn the screw either
way on the bottom and top hinge assembly until correct adjustment is
achieved.
7. Depth - to move the door in or out -Loosen the screw on the bottom
and top hinge assembly, hold the door in the desired position, then
retighten the screws.

Remove/Replace the Hinges

Side of Vanity
Removal
1. For a bottom hinge - Remove the cover plate from the hinge base
by sliding the cover plate out towards you, then away from the hinge
base.
2. For a top hinge - Refer to the section "Remove/Adjust the Quiet Close
Assembly" then proceed with the removal procedure for both hinges.
Top of Door
Bracket
Latch
Hinge Base
Hinge Cup
Slot
Tab
11
Cover Plate
1067217-140
1067217-W2-B