Telephone Settings; Set Date And Time - AT&T CL2940 User Manual

Telephone settings

Telephone settings
Use the menu to change the telephone settings.
Press MENU/
1.
2. Press or
CID
3. Press /SELECT to save your selection and move to the next feature.
MENU
NOTE: Press CANCEL to cancel an operation or exit the menu.

Set date and time

When the telephone is idle, the screen shows the date and time. If
you subscribe to caller ID service, the day, month and the time are set
automatically with each incoming call. You may also set the date and time
manually by following the steps below.
Press MENU/
1.
DATE/TIME and USE # FOR AM/PM alternatively.
2. Use the dial pad keys (0-9) to set the month, or
press DIR
to skip to set the day.
3. Use the dial pad keys (0-9) to set the day, or press
DIR to skip to set the hour.
4. Use the dial pad keys (0-9) to set the hour, or press
DIR to skip to set the minute.
5. Use the dial pad keys (0-9) to set the minute.
6. Press # (pound key) to select between AM or PM.
7. Press /SELECT to save your setting and move
MENU
to the next menu setup.
repeatedly until the screen displays the desired feature.
SELECT
until the screen displays the desired setting.
DIR
the screen displays
SELECT,
11
DATE/TIME
1/01 12:00
USE # FOR AM/PM
12:00
1/01
AM
AM