Protech Systems PPC-7400 Operation Manual page 17

Output Requirements:
(1) +3.3V & +5V total output shall not exceed 70W, and the total output
for this subject power supply is 200W.
(2) All outputs shall be safety-isolated from the AC mains and share a
common return. This common return must be connected to supply
chassis.
(3) Voltages and ripple are measured at the load side of mating connectors
with a 0.1uF monolithic ceramic capacitor paralleled by a 10uF
electrolytic capacitor across the measuring terminals.
Dimension: 80mm x 130mm x 40mm
DRIVE BAYS (Optional) :
One 3.5" HDD, one slim FDD, and one slim CD-ROM
EXPANSION SLOTS :
PCI slot for Riser Card use.
CONSTRUCTION :
Electo Galvanized steel chassis.
Aluminium front bezel.
DIMENSIONS :
CASE:
PPC-7402/7405: 400 x 300 x 123mm (15.75" x 11.81" x 4.85")
PPC-7407: 440 x 344 x 123mm (17.32" x 13.54" x 4.85")
NET WEIGHT :
9.5kg (20.9lb) ~ 11kg (24.2lb)
PPC-740X USER S MANUAL
Chapter 1 Introduction
Page: 1-11