Vacuuming With Accessories - Vax VX3 Instruction Manual

Fig. 4/6
Brush Vacuuming on carpeted floors:
• The brushbar is switched on or off using the brushbar on/off switch (Fig. 4/6).
Switch brushbar on for carpeted floors.
• The rotating brushbar loosens deeply embedded dirt and brings it to
the surface.
Vacuuming on smooth surfaces:
• Switch brushbar off to obtain the best results when vacuuming smooth
barefloor surfaces.
Brushbar Reset
1. If something becomes lodged and the brushbar shuts off, turn the cleaner
off and remove obstruction. Press the reset button at the back of the
cleaner head to reset the brushbar motor. (Fig. 4/7).
Reset Button
Fig. 4/7
VX-3 UK D4.indd 7
5. Accessories

Vacuuming with Accessories

1. Press the release button to release the stretch hose tube. The stretch
hose tube with built-in brush can be used for cleaning surfaces
(Fig. 5/1).
Fig. 5/1
2. While pressing the hose release button, pull out the suction hose to
release from stretch hose tube (Fig. 5/2).
Fig. 5/2
How to Operate/Accessories
7
22/12/05 12:52:52