Table of Contents
Advertisement
Dirt Container & Filter
2.
Remove the filter cover by turning it anti-clockwise and pulling it away
from the dirt container (Fig. 6/7).
Fig. 6/7
3.
Press the HEPA filter eject button, located on the top of the dirt container
to release the filter (Fig.6/8).
Fig.6/8
4.
Tap the filter gently on its base. This will dislodge the dirt (Fig. 6/9). Do not
wash, brush or scour the filter this is due to the delicate membrane that
can be damaged.
Fig. 6/9
12
VX-3 UK D4.indd 12
5. Replace the filter back into the dirt container until it clicks into place
(Fig. 6/10).
Fig. 6/10
6.
Replace the filter container and click it into place by turning it in a
clockwise direction (Fig. 6/11). Close the flap and refit the dirt container.
Fig. 6/11
Cleaning The Post-motor Filter
IMPORTANT: Switch off the vacuum cleaner and unplug from the wall outlet.
NOTE: Vax recommend changing the post-motor filter every 12 months.
Call Vax Care line on 0870 6061248 or visit www.vax.co.uk for further
information.
1.
Remove the dirt container.
22/12/05 12:52:57
Advertisement
Table of Contents
