Loop; A To B (Address, Poi, Favorite, Or Point On Map) - Mio Cyclo 300 Series User Manual

Surprise Me™
The device features the Surprise Me™ function that will offer you up to three
exciting routes around your location. If you've already taken a route from the
same location, the device will try to propose you different routes, based on the
possible and available roads around your current location. This way you will
always be offered different routes to choose.
Tap from the Main menu screen and then you can plan the routes randomly
by selecting the following six functions: Loop, Address, POI, Favorite, and
Point on map.
When you choose any of the Surprise Me functions to plan the routes, you can:
• Generate the route by Distance mode (
• Assign the desired amount of distance/time to ride in the Distance/Time
field.
While generating the routes using Time mode, you can set the estimated
average speed of your trip in the Average Speed field. The device will
calculate the estimated distance of it.
• On the Searching Result screen, select one route (by colour buttons) and
then tap GO to start navigating.
To view the general information of the generated routes, tap
) or Time mode ( ).
.
15

Loop

The device will generate the routes from your current location and the start/
end point will be the same as your current location.

A to B (Address, POI, Favorite, or Point on map)

The device will generate the routes from your current location to the following
destination type: Address, POI, Favorite, or Point on map.
Choose one of the above functions and then complete the searching through
the Navigate wizard.
Address